- Super Concentrated
- Wood and Concrete Stripping
Super Stripper is a super concentrated, heavy-duty formulation used to penetrate and emulsify dirt, grease, oil, paint, and stain. Super Stripper is for use on wood and concrete surfaces. It can also clean asphalt and fiber glass shingles. Super Stripper will work in cold water as well as hot water, and rinse free at any temperature.
Super Stripper super conc. (sc) Spec Sheet
Apply SUPER STRIPPER either pure or up to 1:3 depending on the thickness of the finish needing to be removed. Scape and/ or utilize a high pressure rinse.
Must be diluted before use, 1 gallon makes 5 gallons. The optimum cleaning dilution for most surfaces is between 1:2 and 1:4 When stripping paint, stains and sealers use at full strength. Thoroughly wet the entire area to be cleaned. Broom out any puddles of water. Spray solution on with a low pressure applicator, let stand to penetrate for ten minutes. Stubborn areas of layered paint may require brushing and reapplication of SUPER STRIPPER. Rinse with low pressure to avoid damage to wood, high pressure rinse on concrete.
FOR CLEANING ASPHALT SHINGLES: SUPER STRIPPER is a Super Concentrate and is meant to be diluted before being used for roof cleaning. 1 gallon will make 4.
NOTE FURTHER DILUTION:
TO APPLY TO ASPHALT SHINGLES: Further dilute 1:10. When cleaning with a pressure washer and if on a vertical surface, always apply cleaning solutions from the bottom up and rinse from the top down.
Do not use on polished or anodized aluminum. Do not use on any aluminum or painted surfaces at use concentrations of less than 1:40. Do not allow to dry on surfaces. Always rinse thoroughly.