- All Nautral
- Works On All Pool Types
- Easy To Use
- No Residual Phospates
Stain Drain is a all natural stain remover that will leave your pool looking like new. Stain Drain can be used on any type of pool and spa. This is a easy to use product that can just be sprinkled into the pool.
Stain Drain Spec Sheet
1) Balance Pool Water, 2) Lower Chlorine to 1.0 ppm or
less, 3) Brush the pool surface completely - walls and floors, 4) Shut off pool circulation pump, 5) Add Stain Shocker directly to pool surface, around the perimeter of the pool, concentrating in heavy stained areas. Use telepole to direct product onto hard to reach stains. Alternately, product can be placed in a porous bag and applied directly to large stained areas., 6) Allow product to rest for at least 30 minutes, 7) Brush the pool surface completely - walls and floor, 8) Restart System, 9) Use ITD's Metal Manager-Non-Salt (for non-salt pools) or Metal Manager - Salt (for salt pools) to help remove the released metals from the pool water and add weekly maintenance doses to help prevent recurrent staining. Allow filter to run 12 hours before raising chlorine levels to prevent restaining, 10) Re-balance pool water and slowly bring chlorine levels to Health Department requirement, 11) Clean filters after 24 hours of filtration after treatment.