- All-Purpose Product
- Biodegradable Surfactants
- Non-Corrosive / Non-Caustic
- High foam profile
Pro-Edge 50 is a biodegradable, super-strength, highly concentrated, butyl-based blend of powerful ingredients formulated to wet, penetrate, and suspends oil and grease for faster, more thorough cleaning effectiveness. Pro-Edge 50 is engineered specifically to be metered through a hot- or cold-water pressure washer. The high dilution ratio makes the cost-in-use very economical. Pro-Edge 50 is compatible with ferrous and non-ferrous metals and helps prevent flash rusting while cleaning. Pro-Edge 50 can be used safely on many surfaces, including aluminum, stainless steel, glass, plastic, paint and even fine automotive paint finishes. Pro-Edge 50 is ideal for cleaning engines, motors, heavy equipment, farm implements and other objects with high grease content. It is also safe and effective for use on cars, RVs, drilling rigs, mining equipment, trucks and buses, as well as in buildings and a host of other degreasing applications.
Pro-Edge 50 Spec Sheet
For general use: mix with water at a 1:150 dilution rate. Adjust dilution
depending on severity of cleaning situation. Pre-treat stubborn areas with a concentrated solution. Apply with a Hot or Cold Water Pressure Washer: Pressure washers use an injector and mix the detergent into the water spray at a rate of about 1:15. When using a pressure washer, wash from the bottom up (applying detergent) and rinse from the top down.
For Cleaning Vinyl: Simply spray Pro-Edge 50, as is or up to 10 to 15 parts water, onto surface to be cleaned. Starting at the vertical surfaces first then moving to horizontal. Be certain to prevent Pro-Edge 50 from running onto the adjacent paint. Allow the solution to stand for a few minutes, then using a soft bristle brush, sponge or rag, scrub in circular motion. Once all soil has been loosened, rinse with water from the top down. On interior vinyl, rinse with damp to wet soft cloth, then with dry soft cloth.
For Oil Removal: Spray as is on the oil to be removed. Agitate the mixture until all the oil is emulsified for removal. It may then be rinsed to drain or sopped up using rags, paper towels or oil dry. Pro-Edge 50 may affect some paints. Test on a small inconspicuous area to determine compatibility before broad based use on the item to be cleaned.