Fire & Soot Remover is designed for the removal of carbon soot stains on non-porous surfaces resulting from fire and smoke damage. It will also emulsify heavy grease, soap scum, rubber burns, floor finishes, black heel marks, dirt, printer ink, and carbon deposits.Fire & Soot Remove has excellent cleaning capabilities even at extremely high dilution rates. It is nonflammable and contains no hard abrasives.
Fire & Soot Remover Spec Sheet
May be sprayed, mopped, wiped or brushed on. Recommended dilutions:
For Light Duty (walls, floors and other surfaces) 1:20; For Medium Duty (accumulations of dirt and grease, general bathroom and kitchen cleaning, and steam cleaning) 1:10.
For Heavy Duty (engine degreasing, degreasing industrial machines, soot and smoke stains, removing heavy carbon, grease or oil deposits) 1:1.
Carbonized grease is removed by allowing to remain on the surface for a few minutes, then use scraper or putty knife to lift off carbon. Spray again and rinse with potable water. Do not allow to dry on surfaces. Always rinse thoroughly.