- Improves release and reduces cleaning of formwork
- Leaves no residue, stain or discoloration
- Biodegradable, oil-substitute base
- Rinses more freely than oil-based products
- Non-evaporative formula
Concrete Form Release OS is a chemically reactive, oil-substitute base, concrete release agent specially engineered to prevent bonding of the concrete to forms and form liners. It contains no waxes, silicones, or oils.
Concrete Form Release OS Spec Sheet
DO NOT DILUTE. CONCRETE FORM RELEASE OS is formulated ready-to-use. Form surfaces should be clean of dirt, rust, scale and concrete buildup prior to application. This product should be applied using an atomizing or misting spray tip so that application may be in thin uniform films to maximize product performance and economy. Over-application will not produce better results and may cause dusting. Excess material or puddles should be removed with a squeegee and absorbent rags.
When properly applied, CONCRETE FORM RELEASE OS will not leave any residue or stain on the concrete, producing a smooth, architectural concrete surface ready for subsequent coatings. Coating manufacturer’s recommendations for surface preparations must be followed.