Description
Aluminum Weld Cleaner & Brightener is formulated for aluminum and stainless steel trailers. Do not use on other surfaces such as aluminum wheels or aluminum engine blocks. If splashed on glass, wash off immediately.
Aluminum Weld Cleaner & Brightener
Formulated For Aluminum and Stainless-Steel Trailers
Aluminum Weld Cleaner & Brightener is formulated for aluminum and stainless steel trailers. Do not use on other surfaces such as aluminum wheels or aluminum engine blocks. If splashed on glass, wash off immediately.
Additional information
| Color | Light Straw |
|---|---|
| pH | ≤1 |
| Odor | Acerbic |
| Physical State | Liquid |
| DOT | Hazardous |
| Dilution | Concentrate |
| Packaging Option | 275 Gallon Tote, 55 Gallon Drum, 5 Gallon Pail |
May dilute with water before using. Mix solution in a plastic or stainless steel bucket or sprayer. Make up only enough solution for the job at hand.
For Cleaning Trucks and Trailers: Under average conditions of temperatures (55-85°F) and relative humidity (50%), a solution of 1 part concentrate with 1 part water will give good results. Since lower temperatures slow cleaning action use a stronger solution on cool days.
Note: Working in hot direct sun may cause streaking. Wet down sides of trailer to cool surface before applying. Whenever possible, it is better to work in the shade.
To Apply: Always work from the bottom up to avoid streaking and also work only small areas so surface does not dry before rinsing. Spray product after solution has set for about 15 seconds; flush thoroughly with water, being sure to rinse adjacent concrete ramps, floors, and drains. Do not run through pumping system or heating coils.
